Streamlined workflows and complete data security for your practice technology
If you plan to run more than one acquisition unit Hub is ideal for you: Hub keeps data available across all devices so there is no need to recreate patient data or transfer cases from one device to another.
And it gets even better: Once the scan is done, your in-office dental technician can pick a case from the action items list to design, and save the restoration. The case then returns to the practice-wide list as a production job.
Never worry about hard disk failure or system failure again. Thanks to duplicate backup copies, your data is always available with Hub.
In this video you will learn in detail what Hub can do for you:
Versatile device, multiple advantages.
Consistent data throughout the practice
Hub is ideal for users with multiple acquisition units: All available data is distributed to all compatible devices in the network.
Intelligent data transfer
Hand in glove with your practice lab: Once the scan is done, your in-office dental technician can pick a case from the action items list to design, and save the restoration. The case then returns to the practice-wide list as a production job.
Easy to use
Thanks to auto-configuration there is no tedious setup and no need to hire a technician. Just connect Hub to your network and it configures itself.
Streamlined workflow
Hub keeps data available across all devices so there is no need to recreate patient data or transfer cases from one device to another. Hub also saves and coordinates job status data, keeping your staff free to complete orders at their leisure without the need for reminders.
Protection against data loss
When it comes to case storage, duplicate copies provide protection against data loss. Hub data storage and transmission are encrypted so securely that even our technicians cannot access your data from outside your office. Hub has no vulnerabilities to make it susceptible to theft or misuse, ensuring that your patients’ personal privacy remains protected.
Future updates are included
Your purchase ensures that you will benefit from all the new features released for Hub in the future. After all, the objective is to simplify and improve workplace efficiency, and to secure your data at all times.
Hub impressions
Downloads for Hub
Hub Control Center
The following actions are performed with the Hub Control Center:
- New Hub Setup
- Replacement Hub Configuration
- Configure Hub
- Display Notifications
Hub Control Center Installer.exe 182 MB
Software Download
Hub requires CEREC Software 4.5.1 or later. You can directly download the latest software from this page.
Please note that both elements must be available: License code and CEREC Software. The software can be used only in this manner. CEREC SW 5.1 can be used on CEREC Primescan AC, CEREC Omnicam AC (new cart) and CEREC AC Omnicam with Performance Upgrade. Purchasing CEREC SW 5.1 enables the installation and usage also on Primescan AC and Omnicam AC (new cart). For more information please read the upgrade description.
CEREC Primemill Firmware Update M17-2.3.70-V112020 340 MB
The new CEREC Primemill firmware includes several improvements and bugfixes. It is compatible with the CEREC SW 5.1.3 which was introduced in late January 2021.
Update Description CEREC Primemill Firmware M17-2.3.70-V112020 133 kB
CEREC SW 5.1.3 1 GB
The update CEREC SW 5.1.3 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.1.2
Update Description CEREC SW 5.1.3 176 kB
CEREC SW 5.1.2 Material Pack 51 MB
Update Description Material Pack CEREC SW 5.1.2 193 kB
CEREC SW 5.1.2 1000 MB
The update CEREC SW 5.1.2 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.1.1.
Update Description CEREC SW 5.1.2 219 kB
CEREC SW 5.1.1 998 MB
The update CEREC SW 5.1.1 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 5.1.0.
Update Description CEREC SW 5.1.1 44 kB
CEREC SW 5.1 Material Pack 33 MB
New material with Material Pack CEREC SW 5.1: Activation of CEREC Guide 2 and CEREC Guide 3 for US | Straumann: Variobase C (not for US/not for Japan)
CEREC SW 5.1 4 GB
Upgrade Description CEREC SW 5.1 coming from SW 4 65 kB
Upgrade Description CEREC SW 5.1 coming from SW 5 38 kB
CER-document-Countries-CEREC-5-1-approval.pdf 23 kB
Upgrade Advisor Software Generation 5 74 MB
Dentsply Sirona Software Generation 5 runs on Windows 10. In order to benefit from Software Generation 5, a hardware performance upgrade might be necessary for Omnicam users. Please check which Performance Upgrade you need by using our Upgrade Advisor.
Please note that both elements must be available: License code and CEREC Software. The software can be used only in this manner. CEREC SW 5.0.x can only be used on CEREC Primescan AC and CEREC Omnicam AC (new AC). Purchasing CEREC SW 5.0 enables the installation and usage also on Primescan AC and Omnicam AC (new AC). Updates rely on the previous installation. You have to install CEREC SW 5.0 initially to update to CEREC SW 5.0.1 and CEREC SW 5.0.2.
CEREC SW 5.0.2 596 MB
CEREC SW 5.0.1 600 MB
CEREC SW 5.0 4 GB
Please note that both elements must be available: License code and CEREC Software. The software can be used only in this manner. With CEREC SW 4.6, it is possible to skip over the uninstallation of a CEREC SW 4.5.x during the installation. The uninstallation of CEREC SW 4.5.x is however recommended by Dentsply Sirona, since insufficient memory on the hard disc can lead to malfunction of the software. Attention: If CEREC SW 4.5.x is uninstalled subsequently, CEREC SW 4.6 will also be uninstalled. A reinstallation of the CEREC SW 4.6 will be necessary. The already entered CEREC SW 4.6 license will still be valid.
CAD/CAM Prerequisites Software Patch 293 MB
Necessary for the installation of CEREC Software 4.6.x and CEREC CAM Software 4.6.x
Patch for CEREC SW 4.6.1 Material Pack 10 MB
Preinstalled CEREC SW 4.6.1 with Material Pack required. Bugfix for layered blocks.
CEREC Software 4.6.1 Material Pack
CEREC SW 4.6.1 & CEREC CAM SW 4.6.1 Material Pack Description 189 kB
CEREC Software 4.6.1 636 MB
CEREC Software 4.6.1 - Update Description 123 kB
The update CEREC SW 4.6.1 is distributed via AutoUpdate. The update requires a pre-installed version CEREC SW 4.6.x. Not permitted in the US.
CEREC Software 4.6 - Download 108 MB
Instructions for installation of CEREC SW 4.6 via web installer 296 kB
CEREC Software 4.6 - Upgrade Description 127 kB
Operator's Manual - CEREC Software 4.6.x 4 MB
Not valid for USA
CEREC Software 4.5.2 555 MB
CEREC Software 4.6 - Download 108 MB
Instructions for installation of CEREC SW 4.6 via web installer 296 kB
CEREC Software 4.6 - Upgrade Description 127 kB
Tested Hardware List
Tested Hardware List 176 kB
Contact us for more information
Find out more about the CEREC system from Dentsply Sirona by requesting product information.